Why eco-leather cracks and yellows
PU hydrolysis, plasticizer loss in PVC, and natural polymer aging over time

If your favorite jacket, bag or armchair has started cracking or peeling, it is not always due to poor care. Faux leather is a marketing name that covers several different synthetic materials, most often polyurethane (PU) coated onto a woven or knit backing fabric, less often polyvinyl chloride (PVC). PU hydrolysis and plasticizer loss in PVC are natural processes of polymer aging. They occur sooner or later, regardless of how carefully you handle the material.
Hydrolysis is a reaction of PU with atmospheric moisture that gradually breaks down urethane bonds. This is accelerated by UV radiation and elevated temperature. Specific numerical thresholds, humidity above 60%, temperature above 25°C, a period of 3 to 7 years until visible peeling appears, are ballpark industry figures. They are not the result of a single, strictly citable study. Treat them as approximations, not hard rules.
The breakdown mechanism: what actually fails in the material
PU hydrolysis breaks bonds chemically, PVC plasticizer loss is a physical process
The PU layer in faux leather is a thin coating applied to a backing fabric, usually a knit or cotton weave. When urethane bonds break down under the influence of moisture, the coating loses elasticity regardless of the condition of the material underneath. The effect first appears as a fine web of cracks in the areas of heaviest flexing, for example at a jacket's elbow crease or a bag's handle.
PVC ages differently. The plasticizing additives that give the material its softness gradually migrate toward the surface over time and slowly evaporate or wear off. The less plasticizer remains in the structure, the harder and more brittle the material becomes, until it eventually cracks when flexed instead of bending. This is a physical process, not a chemical breakdown as with PU, but the end result is similar: permanent, visible surface damage.
Symptom, cause and reversibility
PU hydrolysis, loss of polymer elasticity. Irreversible: only renovation with lacquer or replacement
Loss of plasticizer in PVC or PU stiffening at temperature below 5°C. Partially reversible: regenerating creams slow down the process, they do not undo it
Early phase of PU hydrolysis or PVC plasticizer migration to the surface. Early phase reversible by cleaning, advanced phase not
Photo-oxidation of dyes under UV radiation. Irreversible under home conditions
Breakdown of the adhesive layer due to moisture and mechanical stress. Irreversible
How many years does faux leather last: PU, PVC and bio-based materials
approximate durability depends on the material type, backing layer, and how it's used
PU on knit
the most common type in clothing
Most prone to grid cracking in areas of constant flexing.
PVC
stiffens over time
Loses plasticizer, so it becomes increasingly hard and cracks more easily.
Microfiber PU
the most durable variant
A densely woven backing withstands repeated flexing better than a plain knit.
Bio-PU
partly plant-based polyurethane
Durability similar to classic PU on knit.
Piñatex
fiber made from pineapple leaves
A plant-based material coated with resin, durability depends mainly on the quality of the top coating.
Why no method reverses polymer breakdown
the difference between cleaning and true material regeneration
No method, neither home nor professional, reverses polymer structural degradation. Cleaning improves appearance and material hygiene, but does not “regenerate” it to its original state. Breaking down urethane bonds or loss of plasticizer simply cannot be undone. Store-bought sprays and lacquers for faux leather renovation can refresh the color and smooth the surface visually, but they do not restore the polymer's lost elasticity underneath.
With advanced peeling, above 20 to 30% of the surface, the only realistic option remains item replacement or acceptance of the current condition. Conditioning creams for PVC can slow further plasticizer loss if applied early, before the material starts cracking, but they will not work on an already stiffened section.
How to slow down faux leather breakdown
Do
- Hang clothes and bags instead of folding them long-term
- Keep away from radiators, heaters and direct sunlight
- Wipe with a slightly damp, soft cloth instead of soaking it
- Condition PVC items with a care cream before they start cracking
Don't
- Do not dry faux leather near a heater or with a hair dryer
- Do not clean it with solvents or alcohol-based products
- Do not iron directly on the faux leather surface
- Do not leave an item folded in the same spot long-term
First signs of stickiness or frosting, meaning early hydrolysis, are a signal to contact a laundry right away, not to wait until the problem gets worse. Professional cleaning and drying at this point can genuinely slow the material's further breakdown, especially for a valuable jacket or bag whose look you want to preserve as long as possible.
What not to do with advanced cracking
Do not reach for acetone, isopropyl alcohol or other strong solvents to clean a cracked surface. They dissolve the already weakened polymer structure further and can accelerate delamination. Also avoid machine-washing items with large faux leather panels, for example jackets or bags with inserts, because mechanical friction in the drum speeds up cracking in spots that are already weakened.
Now you know the theory. Practice can be less forgiving.
If you would rather not risk your favourite piece, leave it to the specialists at Gorące Żelazko laundry in Lublin.
Frequently asked questions
The main causes are PU hydrolysis, a reaction with moisture that breaks down urethane bonds, and plasticizer loss in PVC. Both processes accelerate with UV radiation and elevated temperature, and are natural polymer aging, not always a result of poor care.
This is photo-oxidation of dyes under UV radiation. The process is irreversible under home conditions and worsens with prolonged, direct sunlight.
Depends on the type: PU on knit 2 to 5 years, PVC 5 to 8 years (though it stiffens over time), microfiber PU up to 8 to 15 years. Among bio-based materials, bio-PU typically lasts 3 to 6 years, and Piñatex 3 to 5 years.
Hung up or in its natural position, never folded for longer than a few days. Permanent creases along fold lines lead straight to grid cracking in those spots.
Conditioning creams slow down plasticizer loss in PVC if you start using them early, before the material begins cracking. They work less well on urethane bonds in PU, because hydrolysis is a chemical breakdown, not just the loss of one ingredient. No cream will undo cracks or peeling that has already formed.
About the author
Małgorzata Małecka
Owner of the Gorące Żelazko laundry
Małgorzata Małecka runs the Gorące Żelazko laundry in Lublin. Together with her team, she makes sure customers' clothes, shoes and fabrics come back clean and in the best possible condition.





