Gorące ŻelazkoGuides
Fabrics

Why Jeans Bleed and Lose Color

The chemistry of indigo dyeing explains crocking and fading

Author: Małgorzata MałeckaPublished on 5 min read
Why Jeans Bleed and Lose Color

The key to understanding why denim behaves differently from other cotton fabrics lies in the chemistry of indigo dye, with the formula C16H10N2O2. Indigo belongs to the group of vat dyes and is insoluble in water in its oxidized form. That's why it's first reduced to a soluble leuco form, which is colorless or yellowish, before being applied to the warp. Only oxidation in air restores the characteristic blue color and fixes the dye to the fiber.

That last sentence has fundamental practical importance: indigo doesn't penetrate deep into the cotton fiber, but deposits mainly on its surface. This is called ring-dyeing: only the outer "ring" of the fiber is dyed, while its core remains white. You can check this yourself: unravel a thread from old jeans and you'll see white fibers in the middle, even though the outside of the yarn is clearly blue.

This property has three consequences that explain nearly all the "weird" denim behaviors.

First, denim loses color with every wash: this is a physicochemical phenomenon built into the nature of vat dye, not a flaw in the fabric or washing process.

Second, mechanical friction, such as rubbing against other clothes in the washer, removes dye from the fiber surface faster than in the case of reactive dyes, which bond chemically with cellulose at a deeper level.

Third, crocking - the rubbing off of dye dry or wet - is normal for raw denim in the first cycles of use and washing: the dye transfers onto skin, car upholstery, or other lighter fabrics.

The darker and more raw the denim, the more intense the crocking at the start, and the faster this effect weakens after the first 3 to 5 washes. Simple home test: rub a dry, light cloth across a piece of new jeans' leg. If a clear blue mark appears, keep them away from light upholstery, rugs, and other clothes until the test comes out clean.

The scale of this phenomenon can be measured, and the textile industry has done so for decades using two standards. Rub resistance is assessed by ISO 105-X12, equivalent to the American AATCC 8 standard. Wash resistance is assessed by ISO 105-C06.

Raw indigo denim typically achieves low to medium results on the gray scale (1 to 5, where 5 means no color transfer) for wet rub resistance in the first washes. These measurements support the practical recommendation: wash new, dark, or raw denim separately from light fabrics for the first 3 to 5 cycles. After this period, excess loose dye is rinsed away, and the risk of transferring color to other clothes drops sharply.

Industrial "Aging" Methods for Denim

Before jeans reach the store, many pairs go through deliberate industrial "aging" processes worth knowing about, because they explain differences in how different pairs behave during home or laundry washing.

Stone wash is washing with pumice, a volcanic stone, in industrial drums. The stone mechanically scrapes the surface dye-bearing fibers, exposing the lighter core. After stone wash, the fabric is more prone to further rubbing wear in subsequent home washes because the fiber surface is already partially weakened.

Enzyme wash replaces or supplements stone with cellulase enzymes, which selectively digest surface cellulose fibers at process temperatures of about 50 to 60 degrees Celsius. Acidic enzymes work at pH 4.5 to 6.5, while neutral or alkaline enzymes work at pH 7 to 9. The visual effect is similar to stone wash but noticeably gentler on the fabric structure.

Acid wash involves soaking pumice in a solution of sodium hypochlorite or potassium permanganate before washing, creating a strong, contrasty bleaching effect. Fabric subjected to acid wash has weakened fiber structure where bleaching was most intense, so it requires gentler treatment in laundry washing: lower spin speeds and avoiding additional friction.

Sandblasting, or mechanically abrading with sand for a worn look, is today restricted or even banned in many countries due to occupational health concerns. It exposes workers to the risk of silicosis. Fabric subjected to this process is the most prone to tearing of all the methods described.

Knowing these processes lets you assess realistically when wear on the knees or thighs looks suspiciously uniform. It's very often a factory design effect, built into the fabric before the first wash, not the result of careless home washing.

Wash new, dark or raw denim separately for the first 3 to 5 washes, preferably in cold water. Only after this period, when excess loose dye is rinsed away, can you safely mix it with other dark clothes in one cycle.

Trouser washing and pressing from 40 PLN

Now you know the theory. Practice can be less forgiving.

If you would rather not risk your favourite piece, leave it to the specialists at Gorące Żelazko laundry in Lublin.

Now showing: Trouser washing and pressing

Frequently asked questions

About the author

Małgorzata Małecka

Owner of the Gorące Żelazko laundry

Małgorzata Małecka runs the Gorące Żelazko laundry in Lublin. Together with her team, she makes sure customers' clothes, shoes and fabrics come back clean and in the best possible condition.