The specialisation of hotel towels
Why hotel terry cloth requires a different approach than home washing

Hotel and catering towels follow different rules than a home bathroom, because the scale and sanitary requirements are completely different.
The high absorbency of terry cloth comes from its loop structure: densely woven loops increase the surface in contact with water, so it absorbs more than a flat fabric of the same size. That same structure, however, means it pills and mats more easily under poor care, and at hotel scale that effect builds up faster.
Most often it is a cotton-polyester blend, in ratios from 60/40 to 80/20, with 65/35 and 70/30 being the most popular. This composition gives lower batch shrinkage and less pilling across hundreds of wash cycles a year.
The disinfection cycle in such facilities usually falls in the 60-90°C range, in line with sanitary guidelines for shared-accommodation establishments.
Hotel and catering towel labels also more often carry the chlorine bleaching symbol (an empty triangle) than home ones.
This matters when choosing disinfectants in an industrial laundry.
Composition and parameters of hotel terry
Weave, weight and sanitary requirements in one overview
Terry parameters in industrial laundering
Cotton-polyester blend, most often 60/40 to 80/20, with 65/35 and 70/30 dominating
Usually 400-600 g/m², with 600 g/m² and above in the premium segment
Most often 60-90°C, in line with sanitary guidelines for shared-accommodation establishments
More common than at home, marked on the label with an empty triangle symbol
Dosing control
Automatic dispensers with precision down to the millilitre per kilogram of load, no eyeballing it the way a home washing machine usually gets used.
Disinfection temperatures
Wash tunnels holding 60-90°C for a controlled time, regardless of the size of the load thrown into the drum.
Odour neutralisation
Cycles with sodium percarbonate and fully completed drying in industrial dryers with higher thermal output than home ones.
Restoring absorbency
High effectiveness already after 2-3 cycles with soda and enzymatic detergent at high temperature, even for towels “killed” by years of softener.
At hotel-batch scale, meaning much larger loads than a home washing machine, automated dosing and drying stop being a luxury. It becomes simply a condition for the whole operation to be worthwhile at all.

Caring for terry cloth at home
Four steps that extend a towel's absorbency and softness
- 1
Sort before washing
Wash terry towels separately from fabrics that shed fibres, such as fleece or tracksuits. Fibres from other materials get caught in the loops and permanently dull the towel.
- 2
Dose detergent precisely
Excess detergent does not rinse out fully from the dense loop structure and over time reduces absorbency. Stick to the dose from the packaging, matched to the size of the load.
- 3
Wash without softener, at the right temperature
Softener coats the fibre in a thin layer that blocks water from getting in. Choose the temperature from the label; 40-60°C is usually enough for everyday home hygiene.
- 4
Dry fully before storing
A towel folded away still damp in a closed cupboard encourages musty odours and mould. Before drying, it helps to shake the towel out vigorously to lift the tangled loops.
Terry cloth at home in a nutshell
Do
- Wash regularly at the temperature recommended on the label
- Shake the towel out before drying to lift the loops
- Dry it fully before folding it away into a cupboard
- Keep it separate from fabrics that shed fibres
Don't
- Do not use fabric softener on terry towels
- Do not store a damp towel folded in a stack of clothes
- Do not dry terry cloth directly on a radiator
Softener is the most common mistake
Fabric softener is one of the most common mistakes when washing terry cloth. It improves the feel to the touch, but it blocks water from getting into the loops. The effect is the opposite of what is intended: the towel smells nice but dries skin less effectively, and absorbency drops noticeably after just a few such washes.
When to trust a professional laundry
Decision criteria: cost, time, and confidence in the result
Washing at home is entirely enough for routine care, fresh stains, and the prevention described earlier in this article.
The problem appears where home methods have already run out of potential.
It is worth considering a professional laundry, such as Gorące Żelazko in Lublin, when one of the following signs shows up:
- A stubborn odour does not go away despite 2-3 attempts at home.
- You are dealing with a dried-on organic stain older than a few days.
- The towels are intended for an allergy sufferer or a baby, and you need verifiable thermal disinfection.
- It is a premium towel, for example made of Egyptian or Pima cotton at 600+ g/m², where a washing mistake really costs a lot.
- You run a hotel or catering business and need repeatable, sanitary-compliant cycles at scale.
As a rough guide, washing a terry robe on this basis starts from 40 PLN.
Now you know the theory. Practice can be less forgiving.
If you would rather not risk your favourite piece, leave it to the specialists at Gorące Żelazko laundry in Lublin.
Frequently asked questions
Terry cloth is a loop fabric, formed from three elements: the ground warp, the pile warp, and the weft. It is most often made of cotton, whose cellulose binds water via hydrogen bonds thanks to the fibre's interior (lumen) and hydroxyl groups.
For everyday use, the 500-600 g/m² bracket is optimal: it gives high absorbency without the extremely long drying time typical of fabrics above 600 g/m². Lighter towels below 400 g/m² dry faster but absorb noticeably less water each use.
Bamboo is softer to the touch and claimed to be up to 40% more absorbent, but it has lower mechanical durability than combed or Egyptian cotton. That is why it dominates in baby towels and “eco” products, and works less well in heavily used everyday sets.
A bath towel is worth washing after 3-4 uses, and a face towel after as little as 1-2, since it picks up bacteria from damp skin faster. In households with allergy sufferers or small children, it is better to stay at the lower end of that range.
The most common cause is a layer of softener and detergent residue built up on the loops over years of washing. A few high-temperature cycles with baking soda, without softener, usually restores absorbency partially, though heavily worn fibre loses it for good.
About the author
Małgorzata Małecka
Owner of the Gorące Żelazko laundry
Małgorzata Małecka runs the Gorące Żelazko laundry in Lublin. Together with her team, she makes sure customers' clothes, shoes and fabrics come back clean and in the best possible condition.





